EchTherm™
NeoTherm Consulting est le développeur du logiciel de calcul EchTherm™ dédié aux échangeurs thermiques.
This software is distributed exclusively by GRETh, Groupement pour la Recherche sur les Échangeurs Thermique (French Heat Exchanger Research Group), a reference in the field.
EchTherm (for Heat Exchange) is intended to be easy to use and easy to learn, it integrates a new approach and a new sizing approach via basic engineering tools, this one is more progressive (step by step) and is based on the following theme: "From technology to sizing of exchangers"
Venez suivre l’actualité du logiciel sur la page linkedin
This product is to be considered as a real "toolbox" for heat exchanger sizing. Thanks to its user-friendly interface, it is easy to use, didactic and meets the needs of many engineers, both experts and beginners.
Indeed, its "step by step" approach allows an easy and quick understanding of the phenomena involved in heat exchangers, as well as of the different parameters interacting in the sizing of exchangers, starting with the technological choice up to the fine analysis of the choice of empirical correlations and the operation in degraded conditions.
In addition to the calculation of the various parameters essential to the sizing of heat exchangers such as heat exchange coefficients and pressure drops, this software integrates many tools and thus allows :
-
To help in the choice of an exchanger technology adapted to an industrial process and its constraints: Technology Decision support;
-
To size or simulate the performance of a heat exchanger using simplified methods: Sizing / Simulation sheets;
-
To bring an expertise on the methods/correlations for the calculation of the thermo-hydraulic parameters (transfer coefficient and pressure drop): Expertise sheets (Expertise);
-
To assist in the thermal or mechanical diagnosis of the operation of a heat exchanger in degraded conditions: Mechanical & Thermal Diagnostic sheets;
-
To have access to additional calculation tools: Tools (TOOLS+) sheets.
DE NOMBREUSES TECHNOLOGIES D’ÉCHANGEURS
- Tubes et calandre (TEMA E, F, J et K)
- Faisceau de tubes (Lisses / avec ailettes circulaires ou continues)
- Coaxial (Tube-in-tube)
- Plaques corruguées (à joints ou brasées)
- Plaques et ailettes
- Plaques matelassées (Pillow Plate)
- Spiralé
- Mini / micro-canaux
- Réacteur agité (Double enveloppe, serpentin ou demi-coquille)
- Caloduc et Thermosiphon

DIFFÉRENTES MÉTHODES DE TRANSFERT POUR CHAQUE TECHNOLOGIE
- Monophasique et diphasique (évaporateur et condenseur)
- Convection forcée et naturelle

UNE BASE DE DONNÉES CONSÉQUENTE
- Plus de 300 fluides (industriels, frigorigènes, saumures, caloporteurs…)
- Plus de 60 matériaux (Nuances d’aluminium, cuivre, acier, titane, cupro-nickel…)
This tool is thus dedicated to experts working continuously in the field of heat engineering but also to design office personnel for whom heat engineering is not a specialty.
RefriHVAC™
NeoTherm Consulting develops a calculation software dedicated to the refrigeration and HVAC industry : RefriHVAC

In this field, refrigeration specialists or business managers often use Excel tools developed internally. These tools are extremely time consuming to create, difficult to use and to maintain (obsolescence of the macro language, loss of knowledge due to the departure of the developer).
Venez suivre l’actualité du logiciel sur la page linkedin
NeoTherm Consulting offers a tool designed specifically for the refrigeration and HVAC industry entirely FREE !
Vous pouvez utiliser le formulaire en ligne ci-dessous pour effectuer une demande de téléchargement du logiciel RefriHVAC (logiciel gratuit) !

Environ 100 fluides frigorigènes disponibles, dont :
- HFC et mélange HFC : R134a, R404A, R125a, R410A, R407C, R32
- HFO et mélange HFC/HFO A2L faible GWP : R1234ze, R1234yf, R1233zd, R455A, R454C, R452A, R450A R471A, R513A, R513B, R473B
- Fluide Naturel : R744 – CO2, R717 – Ammoniac
- Hydrocarbure : R290 – Propane, R600 – Butane, R600a – Isobutane, R1270 – Propylène
This software is your tool for business calculations and allows you to do :
Refrigeration cycle calculations
-
Single-stage cycle (with or without intermediate heat exchanger/saver, with or without liquid injection)
-
Two-stage cycle (total or partial liquid injection, with or without intermediate exchanger/saver)
-
Transcritical CO2 cycle (with or without intercooler/saver)
-
Transcritical CO2 booster cycle
-
Cascade cycle
Tools for your realizations in the field of HVAC
-
Sizing of air handling units
• Calculation of supply air conditions (required supply air flow rate, temperature/humidity) from the data of your specifications (thermal and hydric loads, required supply air temperature)
• All fresh air solution or with stale air return (option of automatic calculation of the mixing flow rate or flow rate imposed by the user)
• Calculation of the power of the various components of your AHU
• Calculation of the water or steam flow rates for your humidifiers
• Calculation of the condensate flow rates on your coil / recuperator
• Components taken into account (depending on your installation): Mixing box, Heat recovery unit, Hot coil (preheating and/or heating and/or terminal), Cold coil with or without dehumidification, Adiabatic and/or steam humidifier.
-
Balancing of hydraulic networks : Calculation of the Kv of balancing valves
• up to 10 emitters/stage
• up to 8 floors/column
• up to 10 columns
-
Geothermal module simulation : Calculation of thermal power and fluid outlet temperature for 3 types of geothermal probes
• Vertical probe
• Surface probe
• Baskets
-
Calculation of solar thermal air panel : Calculation of energy savings through the installation of a solar air collector for the preheating of fresh air in a building.
• Takes into account the orientation and inclination of the collector
• Calculation of the monthly and annual energy consumption of the basic building based on the type of construction (RT2012, RT2005, etc.), the surface area of the building and its location (12 possible cities, with monthly average temperature data entered), type of energy used (electricity, gas, fuel oil, wood, etc.)
• Calculation of the CO2 emissions saved and the energy savings through the installation of the solar air collector system
• Calculation of the return-on-investment time
-
Expansion tank calculation : Calculation of the volume of an expansion tank for a heating system
Tools for your realizations in the field of Industrial Refrigeration
-
Cold room sizing : Calculation of loads to be fought
• Choice of simple design (any wall of the room uniform, floor and/or ceiling insulated or not) or complex design of cold room (different walls), including up to 3 different wall materials.
• Automatic calculation of the cooling and/or freezing power of your foodstuffs (up to 5 different foodstuffs (type/weight, temperature of arrival of the products) on a choice of more than 50 possible foodstuffs by drop-down menu: meat/fish, vegetables, fruits, dairy products, beverages, choice of a specific foodstuff possible).
• Consideration of lighting, air infiltration through door openings, human activities, machines and equipment present in the cold room.
-
Refrigerant retrofit analysis tool for an installation
• Brief F-GAS analysis (PRG/GWP criteria, flammability, main recommendations).
• Comparaison de performances de cycle entre deux fluide frigorigène.
• Possibility to compare with a transcritical CO2 cycle.
• Performance analysis, comparisons and cycle plots.
-
Compressor calculation
• Calculation of the mass flow rate of a refrigerant in a refrigeration cycle according to the specific data of a compressor.
Or
• Calculates the heating and cooling capacities of a refrigeration cycle by calculating the mass flow rate and data concerning the fluid and the refrigeration cycle.
• Available on piston, screw or scroll compressors.
-
Refrigerant thermophysical properties calculation : Calculate in an instant all the thermophysical properties of your refrigerants
Additional tools to perform your daily calculations
-
Calculation of singular pressure losses in pipes (elbow, widening and narrowing of section, grid).
-
Calculation of KS for heat exchangers (evaporator, condenser, evapo-condenser).
-
Calculation of thermophysical properties of any type of fluid and material (more than 300 fluids: refrigerants, conventional fluids (water, seawater, etc.), brine (glycol water MEG/MPG, etc.), oil, metals, etc.).
-
Calculation of energy conservation and estimation of heat exchange surface for a heat exchanger..
Custom-made software
NeoTherm develops your software with a sustainable solution regarding operation, compatibility and maintenance.
We develop custom software for our customer’s thermal applications (heat exchanger, thermodynamic cycle, thermal system). We develop for you specific calculation methods and we can also implement your proprietary business rules. Our development tools allow the creation of advanced, interactive and ergonomic interfacing.
In the field of thermal and energy in the broadest sense, many engineers and project managers often use Excel tools developed internally. These tools are extremely time-consuming to create, difficult to use and to maintain (obsolescence of the macro language, loss of knowledge due to the departure of the developer).
NeoTherm Consulting proposes the development of your calculation tools designed especially for you according to your needs.
-
Your needs can be clearly defined or NeoTherm can also intervene in the expression phase of the need.
-
Our software is equipped with ergonomic, advanced and easy to use interfaces for any collaborator.
-
The results can be displayed as self-generated tables and/or curves, custom specification sheets including your logos, your own diagrams or diagrams designed by us at your request.
-
The operation is made easy because of the presence of numerous aids (diagrams, explicit buttons) directly on each software tool.
-
Maintenance is reduced to a minimum and compatibility is assured.
-
The source code can be blocked, made available (reading) or modifiable according to your wishes.
Example of realization
-
Software development of heat exchanger design for an OEM based on the customer's proprietary business rules;
-
Software development of exchanger design for new technology;
-
Software development for the simulation of the performances of a cold production system (simulation on each component of the cycle, research of the laws of operation, reading of weather file, automatic creation of tables and curves, ...).